Many driveway problems are easily fixed by resurfacing, but there are also deeper problems that will require a professional to fix. Attempting to fix these problems yourself could cause more issues and make the problem worse. Driveway Replacement professionals know how to fix these issues properly and can save you money in the process. In some cases, it may even be possible to repair a small crack in your driveway instead of replacing it.
Resurfacing is cheaper than replacing a driveway
If you don’t want to replace your driveway, resurfacing is a great option. It can be done with asphalt, concrete, brick pavers, or sand. However, it is important to make sure that the foundation is in good condition before starting the resurfacing process. Without a good base, cracks in the upper surface will develop and can decrease the lifespan of your new driveway.
Resurfacing a driveway is a more affordable option than tearing up the existing concrete. It costs just a few dollars per square foot, which is considerably cheaper than replacing a driveway. However, you’ll need to factor in demolition and debris removal, which can add another two to six dollars per square foot.
Resurfacing a driveway is an excellent option for driveways that have light damage, such as cracks and dents. It will also make the entire driveway look brand new. However, if you have several large potholes or several cracks more than a quarter-inch in size, you’ll probably need to replace the driveway. However, resurfacing is a much less expensive option than replacing the entire driveway, and it will last at least 15 to 20 years with proper maintenance.
Resurfacing involves adding a new layer of asphalt to your existing driveway. This process will help restore structural strength, and your driveway will look new for many years to come. A few companies that specialize in resurfacing driveways also offer a Pave-Tex component for added protection and longevity.
Repairing small cracks in a driveway
The first step in repairing a driveway crack is to clean the crack thoroughly. To do this, first wash the area around the crack thoroughly, and then use a pressure washer or hose to get rid of debris. Then, chip out any loose material. If possible, remove any vegetation that may be growing in the crack, and burn it if necessary. Also, remove loose concrete.
Cracks in concrete driveways are typically caused by heavy vehicles. Thankfully, these cracks usually only affect a small patch. If you notice a small crack, you can fill it with a concrete patching compound. You can also use a small shovel to work the patching compound into the crack. Once the patching compound has fully penetrated the crack, you can use a smooth caulking gun to smooth it out and make it level with the rest of the driveway’s surface.
Another way to repair small cracks in a Driveway Extension Company is to use a concrete resurfacer. It’s easy to use and you don’t need to hire a professional to do it. If you’re not confident in your abilities, you can do it yourself with a few tools and a video tutorial.
Before you start repairing a driveway crack, you should clean the area thoroughly. Using a pressure washer can remove dirt, mildew, and mold from the area. A high-pressure nozzle will also help prevent the sealant from drying too quickly. A masonry cleaning solution should contain strong degreasing agents that remove plant stains and mold. It is best to have a high-pressure nozzle alongside a low-pressure nozzle.
Cost of replacing a concrete driveway
Cost of replacing a concrete driveway depends on several factors. First, there is the cost of labor. Labor costs about half of the total price of a new driveway. It is possible to save about $2 to $3 per square foot by doing the job yourself, but you must have the right tools and experience. Second, if you want a particular finish, like colored or stamped concrete, you must also factor in labor costs. Lastly, a concrete driveway is typically four inches deep, but you may need a deeper driveway if you have a heavy vehicle.
The cost of a concrete driveway also depends on how the area around the driveway is prepared. For instance, you need to clear bushes and trees to make room for the new driveway. A contractor must also remove topsoil and level the ground. An excavator charges about $30-$50 per hour nationwide, while a grading contractor can charge between $40 and $200 per hour. Depending on the amount of labor required, the cost of installing a new concrete driveway could range from a few hundred dollars to thousands of dollars.
Conclusion
Before hiring a concrete driveway contractor, you need to check their credentials. Ensure they are licensed and insured. You can ask for references from people who have used the services of a specific contractor. Another way to find the right contractor is by asking neighbors who have had the same work done.
